Class-8 Severe Duty Construction Truck Comparisons
On the jobsite
What the specs mean on a jobsite
Four places where the HX and its competitors differ in ways a severe duty construction fleet will notice.
A frame built for the load
Frame ratings run 2,037,600 to 3,536,400 in.-lbs. of resisting bending moment, higher than the T880 (1,776,000 to 2,683,000), Granite (1,880,000 to 3,160,000), and 567 (1,776,000 to 3,012,000). Reinforcements add up to 4,854,000.
Ready for the body you are adding
Up to 30 auxiliary upfitter switches (Granite: up to 10, T880 and 567: up to 5), body-builder wiring at the back of cab and end of frame, and a 27" integral front-of-frame extension for front-mounted equipment.
Power and PTO options
The S13 runs 400 to 515 hp and the Cummins X15 runs 430 to 605 hp, up to 2,050 lb.-ft. Front-engine and rear-engine PTOs are both available, along with transmission-mounted PTOs on Allison 3000 and 4000 automatics.
Built to get in and out of
A welded steel cab with a 52" by 35.5" door opening, 22.5" of belly room, and 72.5" of cab width at the hip, each the largest in this comparison. The hood tilts 61°, narrower than the 70° to 76° on the others.
Head to head
Side-by-side specifications
Specs are grouped by what matters when you are specifying a severe duty truck. The HX leads on frame rating, upfit options and cab entry, and trails on axle capacity, hood tilt, and GVWR. Highlighted cells lead the trucks compared.
Visibility around the cab
Good sightlines keep crews safe around a jobsite. This chart plots the guide’s ten sightline measurements for each truck. A smaller shape means a shorter blind zone.
- International HX
- Kenworth T880
- Mack Granite
- Peterbilt 567
The HX has a shorter blind zone than the T880 on six of ten sightlines and than the 567 on seven of ten. The Granite is shorter than the HX on nine of the ten.
| Specification | FeaturedInternational HX | Kenworth T880 | Mack Granite | Peterbilt 567 |
|---|---|---|---|---|
| Standard build compared | ||||
| Engine | International S13, 430 hp | PACCAR MX-13, 455 hp | Mack MP8, 505 hp | PACCAR MX-11, 415 hp |
| Transmission | International T14 | PACCAR TX-18 | Mack 4500 RDS | Eaton Fuller UltraShift |
| Frame rail (depth x flange x thickness) | 12.25" x 3.38" x .375" | 10.75" x 3.5" x .375" | 11.81" x 5.13" x .437" | 10.75" x 3.5" x .38" |
| Front axle | MFS-20-133A, 20K | FX-20, 20K | FLX20, 20K | PACCAR, 20K |
| Rear axle | RT-46-160, 46K | RT-46-160P, 46K | RT-46-164EH, 46K | MT-40-14X, 40K |
| Rear suspension | Hendrickson HAULMAAX EX, 46K | Hendrickson HAULMAAX EX, 46K | Hendrickson HAULMAAX EX, 46K | Air Trac, 40K |
| Tire manufacturer | Michelin / Continental | Michelin | Michelin | Bridgestone |
| Front tires | 425/65R22.5 XZY3 | 385/65R22.5 XZY3 | 425/65R22.5 XZY3 | 315/80R22.5 M870 |
| Rear tires | 11R22.5 HSR2 | 11R22.5 XDN2 | 11R22.5 X Works | 11R22.5 M726ELA |
| Base warranty | 1 year / Unlimited milesBest | 1 year / 100,000 miles | 1 year / 100,000 miles | 1 year / 100,000 miles |
| Capacity & Chassis | ||||
| GVWR | 80,000 lbs. | 86,500 lbs. | 86,000 lbs. | 60,000 lbs. |
| Bumper to back of cab (BBC), standard build | 119" | 117" | 117" | 115" |
| Back of cab to axle (BA), standard build | 50" | 48.5" | 29" | 29.4" |
| Axle position: set forward | 29.9" | 28" | 29.4" | 29.4" (115 BBC)31" (121 BBC) |
| Axle position: set back | 50.2" | 49" | 51" | 46.9" |
| Frame rating (RBM) | 2,037,600 – 3,536,400 in.-lbs.Best | 1,776,000 – 2,683,000 in.-lbs. | 1,880,000 – 3,160,000 in.-lbs. | 1,776,000 – 3,012,000 in.-lbs. |
| Available reinforcements (RBM) | 3,580,800 – 4,854,000 in.-lbs. | 2,925,000 – 5,853,000 in.-lbs. | 3,230,000 – 4,260,000 in.-lbs. | 2,832,000 – 5,484,000 in.-lbs. |
| Front-axle capacity | 12,000 – 22,800 lbs. | 12,500 – 22,800 lbs. | 12,000 – 23,000 lbs. | 12,000 – 40,000 lbs. |
| Rear-axle capacity | 40,000 – 69,000 lbs. | 21,000 – 78,000 lbs. | 23,000 – 85,000 lbs. | 21,000 – 78,000 lbs. |
| Single rear axle | Not available | 21,000 – 30,000 lbs. | 23,000 – 30,000 lbs. | 21,000 – 30,000 lbs. |
| Tandem rear axle | 40,000 – 58,000 lbs. | 34,000 – 70,000 lbs. | 38,000 – 65,000 lbs. | 40,000 – 70,000 lbs. |
| Tridem rear axle | 50,000 – 69,000 lbs. | 51,000 – 78,000 lbs. | 45,000 – 85,000 lbs. | 53,000 – 78,000 lbs. |
| Front suspension capacity | 12,000 – 22,800 lbs. | 12,000 – 23,000 lbs. | 12,000 – 23,000 lbs. | 12,000 – 40,000 lbs. |
| Rear suspension capacity | 40,000 – 69,000 lbs. | 23,000 – 90,000 lbs. | 23,000 – 85,000 lbs. | 20,000 – 85,000 lbs. |
| Fuel tank | 50 – 300 gal. | 45 – 354 gal. | 50 – 232 gal. | 50 – 300 gal. |
| DEF tank | 7, 10.6, 10.8, 15.9, 18, 25.2 gal. | 7.3, 14, 21, 23.8, 30 gal. | 6.6, 8.7, 11.8, 18.4 gal. | 8, 10.2, 16.1, 20.1 gal. |
| Towing / recovery: front | Hooks, pin | Hooks | Hooks, loops, pins | Pins, eye |
| Towing / recovery: rear | Loops, hooks | Hooks, loops, pintle hitch | Hooks | Eye, hooks, pintle hitch |
| Upfit & Body Builder | ||||
| Body-builder wiring access | Back of cab, end of frame | Back of cab, mid-rail, end of frame | Back of cab, end of frame | Back of cab, end of frame |
| Max auxiliary upfitter switches | Up to 30Best | Up to 5 | Up to 10 | Up to 5 |
| Front-of-frame extension: integral | 27"Best | Not available | 20" | Not available |
| Front-of-frame extension: bolt-on | Not available | Not available | 6", 27" | Not available |
| Bumper extension | Not available | Not available | Not available | Not available |
| Hood hatch | Not available | Not available | Not available | Not available |
| Integral snow valve | Available | Available | Available | Available |
| Powertrain & PTO | ||||
| Engine options | International S13 (12.7L)Cummins X15 (14.9L) | PACCAR PX-9 (8.9L)PACCAR MX-11 (10.8L)PACCAR MX-13 (12.9L)Cummins L9N (8.9L)Cummins X12N (11.9L)Cummins X15 (14.9L) | Mack MP7 (10.8L)Mack MP8 (12.8L) | PACCAR PX-9 (8.9L)PACCAR MX-11 (10.8L)PACCAR MX-13 (12.9L)Cummins L9N (8.9L)Cummins X12N (11.9L)Cummins X15 (14.9L) |
| Horsepower | 400 – 515 hp430 – 605 hp | 330 – 450 hp355 – 445 hp405 – 510 hp320 hp320 – 400 hp450 – 605 hp | 325 – 425 hp415 – 505 hp | 350 – 450 hp355 – 430 hp405 – 510 hp250 – 320 hp320 – 400 hp430 – 605 hp |
| Torque | 1,450 – 1,850 lb.-ft.1,650 – 2,050 lb.-ft. | 1,000 – 1,250 lb.-ft.1,250 – 1,700 lb.-ft.1,550 – 1,850 lb.-ft.1,000 lb.-ft.1,150 – 1,450 lb.-ft.1,450 – 2,050 lb.-ft. | 1,260 – 1,560 lb.-ft.1,460 – 1,860 lb.-ft. | 1,050 – 1,250 lb.-ft.1,150 – 1,650 lb.-ft.1,450 – 1,850 lb.-ft.730 – 1,000 lb.-ft.1,150 – 1,450 lb.-ft.1,450 – 2,050 lb.-ft. |
| Engine warranty | S13: 2 years / Unlimited milesX15: 2 years / 250,000 miles | 2 years / 250,000 miles (all engines) | 2 years / 250,000 miles (both engines) | 2 years / 250,000 miles (all engines) |
| Manual transmission | Eaton Fuller: 10, 11, 13, 18-speed | Eaton Fuller: 10, 11, 13, 18-speed | Eaton Fuller: 10, 11, 13, 18-speed | Eaton Fuller: 9, 10, 11, 13, 18-speed |
| Automated transmission | International T14: 14-speedEaton Cummins Endurant: 12, 18-speed | Eaton Fuller UltraShift PLUS: 10, 11, 13, 18-speedEaton Fuller Advantage: 10-speedEaton Cummins Endurant: 12, 18-speed | Mack MAXITORQUE: 9, 10, 13, 18-speedMack mDrive HD: 12, 13, 14-speed | Eaton Fuller UltraShift PLUS: 10, 11, 13, 18-speedEaton Fuller Advantage: 10-speedEaton Cummins Endurant: 12, 18-speed |
| Automatic transmission | Allison 3000, 4000: 5, 6, 7-speed | PACCAR TX-12, TX-18: 12, 18-speedAllison 3000, 4000: 5, 6, 7-speed | Allison 3000, 4000: 5, 6-speed | PACCAR TX-12, TX-18: 12, 18-speedAllison 3000, 4000: 5, 6, 7-speed |
| Front-engine PTO (FEPTO) | Available | Not available | Available | Not available |
| Rear-engine PTO (REPTO)Transmission-mounted PTO locations and bolt sizes vary by transmission. Ask us for the option list. | Available | Available | Available | Available |
| Visibility by sightline (lower is a shorter blind zone) | ||||
| Driver side rear | 128.7" | 150.6" | 123.8" | 140.3" |
| Driver side forward | 166.9" | 181.8" | 147.3" | 188.5" |
| Forward left side | 223.3" | 293.6" | 193.6" | 266.3" |
| Forward straight ahead | 341.8" | 319.3" | 317.7" | 355.1" |
| Forward over center | 375.9" | 347.1" | 333.1" | 390.4" |
| Forward at hood corner | 371.2" | 362.5" | 353.1" | 380.4" |
| Forward wiper | 392.6" | 421.5" | 392.8" | 378.2" |
| Forward right side | 360.8" | 410.6" | 355.1" | 394.8" |
| Passenger side forward | 314.4" | 294.0" | 278.0" | 310.4" |
| Passenger side rear | 351.2" | 379.5" | 313.5" | 332.2" |
| Cab & Service Access | ||||
| Cab construction | Welded steel | Aluminum | Welded steel | Aluminum |
| Hood design | 3-piece | 5-piece | 1-piece | 3-piece |
| Hood tilt range | 61° | 76° | 75° | 70° |
| Available cabs / sleepers | Day cabLow roof: 56"High-rise: 56", 73" | Day cabLow roof: 40", 52"Mid roof: 52", 76"High roof: 76" | Day cabLow roof: 36" | Day cabLow roof: 44", 58"High roof: 58", 72", 80"UltraLoft: 80" |
| Step height: ground to step | 23.5" | 20.5" | 23.75" | 22" |
| Step height: step to step | 18.75" | 19.25" | 18.5" | 15.75" |
| Step height: step to cab | 14.5" | 14.5" | 10.5" | 16.75" |
| Total cab height | 56.75" | 54.25" | 52.75" | 54.5" |
| Cab width at shoulder | 78" | 78.5" | 74.75" | 78.25" |
| Cab width at hip | 72.5"Best | 67.25" | 65.5" | 70.75" |
| Fuel pedal to back of cab | 46.5" | 43" | 48" | 43.25" |
| Floor to roof at seat edge | 56" | 58.5" | 57.5" | 58.5" |
| Interior cab volume | 92.6 cu. ft. | 99.2 cu. ft. | 93.6 cu. ft. | 98.2 cu. ft. |
| Leg room | 29.03" | 26.63" | 29.69" | 27.50" |
| Belly room | 22.5"Best | 18.75" | 17.5" | 19" |
| Head room (minimum / maximum) | 36.5" / 41.5" | 38" / 45" | 36.5" / 43.25" | 37.5" / 44.5" |
| Door opening (height x width) | 52" x 35.5"Best | 50" x 33.5" | 50.5" x 31.5" | 50.25" x 33.75" |
| Door opening angle | 65° | 68° | 80° | 71° |
| Windshield design / installation | 1-piece, bonded | 1-piece, bonded | 1-piece, roped-in | 1-piece, bonded |
| Windshield slope | 61° | 64° | 69° | 64° |
| Windshield area | 1,909 sq. in. | 1,780 sq. in. | 1,839 sq. in. | 1,946 sq. in. |
| Wiper coverage | 1,193 sq. in. | 1,382 sq. in. | 1,082 sq. in. | 1,343 sq. in. |
| Wiper efficiency | 62% | 78% | 59% | 69% |
| Side glass | 1,144 sq. in. | 1,248 sq. in. | 882 sq. in. | 1,232 sq. in. |
| Rear glass | 749 sq. in. | 625 sq. in. | 842 sq. in. | 1,010 sq. in. |
| Total glass area | 3,802 sq. in. | 3,653 sq. in. | 3,563 sq. in. | 4,188 sq. in. |
| Routine Maintenance | ||||
| Oil and filterListed per engine in the order shown under Engine options. The guide prints three intervals for the HX. | Up to 70,000 mi.25,000 – 100,000 mi.Up to 70,000 mi. | PX-9: 50,000 mi.MX-11: 30,000 – 75,000 mi.MX-13: 30,000 – 75,000 mi.L9N: 1,000 – 1,500 hrs.X12N: 1,000 hrs.X15: 25,000 – 100,000 mi. | MP7: 30,000 – 60,000 mi.MP8: 30,000 – 60,000 mi. | PX-9: 50,000 mi.MX-11: 30,000 – 75,000 mi.MX-13: 30,000 – 75,000 mi.L9N: 1,000 hrs.X12N: 1,000 hrs.X15: 30,000 – 100,000 mi. |
| Fuel filter | Up to 70,000 mi.25,000 – 75,000 mi.Up to 70,000 mi. | PX-9: 50,000 mi.MX-11: 30,000 – 75,000 mi.MX-13: 30,000 – 75,000 mi.L9N: 1,000 hrs.X12N: 1,000 hrs.X15: 25,000 – 75,000 mi. | MP7: 30,000 – 60,000 mi.MP8: 30,000 – 60,000 mi. | PX-9: 50,000 mi.MX-11: 30,000 – 75,000 mi.MX-13: 30,000 – 75,000 mi.L9N: 1,000 hrs.X12N: 1,000 hrs.X15: 25,000 – 70,000 mi. |
| Coolant filter | Not availableNot availableUp to 28,000 mi. | PX-9: 15,000 mi.MX-11: 300,000 mi.MX-13: 300,000 mi.L9N: 500 – 4,000 hrs.X12N: 4,000 hrs.X15: Not available | MP7: 30,000 – 60,000 mi.MP8: 30,000 – 60,000 mi. | PX-9: 15,000 mi.MX-11: 300,000 mi.MX-13: 300,000 mi.L9N: 500 hrs.X12N: 1,500 hrs.X15: Not available |
Best = leads the compared trucks on that spec. Shaded column = International HX.
International HX engines
The two engines offered in the HX. The guide publishes a full rating table for the Cummins X15 only.
International S13 400 – 515 hp
- Engine type
- Diesel, 4-cycle
- Configuration
- Inline 6-cylinder
- Displacement
- 12.74L (777 cu. in.)
- Bore & stroke
- 5.12 x 6.30 in.
- Compression ratio
- 23:1
- Aspiration
- Fixed geometry turbocharger
- Combustion system
- 1800 bar common rail
- Engine lubrication
- 47.5 quarts (45L)
- Total engine weight
- 2,284 lbs.
- Valves
- 4 per cylinder, dual overhead camshaft
- B10 design life
- 1,200,000 mi
- Base engine warranty
- 24 months; unlimited miles
- Optional engine warranty
- Up to 72 months, 600,000 miles
Torque range 1,450 – 1,850 lb.-ft. Fire & rescue applications carry a different base warranty.
Cummins X15 430 – 605 hp
- Engine type
- Diesel, 4-cycle
- Configuration
- Inline 6-cylinder
- Displacement
- 14.9L (912 cu. in.)
- Bore & stroke
- 5.3 x 6.65 in.
- Compression ratio
- 18.9:1
- Aspiration
- Variable geometry turbocharger
- Combustion system
- Direct injection CPI fuel system
- Engine lubrication
- 56 quarts (53L)
- Total engine weight
- 2,961 lbs.
- Valves
- 4 per cylinder, single overhead camshaft
- B10 design life
- 1,000,000 mi
| HP rating | Governed speed (RPM) | Torque (lb.-ft. @ RPM) |
|---|---|---|
| 430 | 2000 | 1650 @ 950 |
| 450 | 2000 | 1650 @ 950 |
| 450 | 2000 | 1750 @ 950 |
| 470 | 2000 | 1750 @ 950 |
| 500 | 2000 | 1850 @ 950 |
| 565 | 2000 | 1850 @ 1000 |
| 605 | 2000 | 1850 @ 1000 |
| 605 | 2000 | 2050 @ 1000 |
| 605 | 2100 | 1850 @ 1000 |
| 525 | 1900 | 1850 @ 1000 |
| 565 | 1900 | 1850 @ 1000 |
| 605 | 1900 | 2050 @ 1000 |
Specifications are taken from the International HX Series Comparison Guide, retrieved November 16, 2026, and describe the configurations and options listed there. Competitor figures are as published in that guide. Availability varies by build, so confirm current specifications with the manufacturer before you order. Kenworth, Mack, and Peterbilt are trademarks of their respective owners. Allegiance Truck Centers is not affiliated with them.