Class 7 Construction Truck Comparisons
On the jobsite
What the specs mean on a jobsite
Four places where the MV and its competitors differ in ways a construction fleet will notice.
Rated for the load
The MV is rated up to 35,000 lbs. GVWR, against 33,000 lbs. for the Freightliner M2 106 Plus and the Kenworth T380. The rear suspension is rated 23.5K, compared with 21K on the M2 106 Plus and 23K on the T380.
Ready for the body you are adding
Up to 30 auxiliary upfitter switches (M2 106 Plus: up to 24, T380: up to 5), body-builder wiring at the back of cab and end of frame, and front-of-frame extensions up to 20" for front-mounted equipment.
PTO options for hydraulic bodies
Transmission-mounted PTO options on Eaton Fuller manual and Allison 1000, 2000, and 3000 automatic transmissions, in 6-bolt and 10-bolt sizes with side, rear, and top mounting positions.
Faster to service
The hood tilts 69°, the widest in this comparison (M2 106 Plus: 58°, T380: 59°). Oil and filter intervals run up to 30,000 miles on the B6.7 and up to 50,000 miles on the L9, against 15,000 miles on the T380.
Head to head
Side-by-side specifications
Specs are grouped by what matters when you are specifying a truck for construction. Highlighted cells lead the trucks compared.
Visibility around the cab
Good sightlines keep crews safe around a jobsite. This chart plots the guide’s ten sightline measurements for each truck. A smaller shape means a shorter blind zone.
- International MV
- Freightliner M2 106 Plus
- Kenworth T380
The MV and the M2 106 Plus trace nearly the same outline. The T380’s blind zones are longer than the MV’s on nine of the ten sightlines; passenger side forward is the exception.
| Specification | FeaturedInternational MV | Freightliner M2 106 Plus | Kenworth T380 |
|---|---|---|---|
| Standard build compared | |||
| Engine | Cummins B6.7, 300 hp | Cummins B6.7, 325 hp | PACCAR PX-9, 270 hp |
| Transmission | Allison 3500 RDS | Allison 3500 RDS | Allison 3500 RDS |
| Frame rail (depth x flange x thickness) | 10.375" x 3.705" x .438" | 10.94" x 3.50" x .344" | 10.63" x 3.5" x .31" |
| Front axle | MFS-08-153B, 8K | DA-F-12.0-3, 12K | D-1201IL, 12K |
| Rear axle | Dana 21060D, 21K | DA-RS-21.0-4, 21K | P22060S, 21K |
| Rear suspension | Vari-rate multi-leaf, 23.5KBest | AirLiner, 21K | HAS230, 23K |
| Front tires | Continental 12R22.5 HSR2 | Hankook 295/75R22.5 XZY3 | Michelin 11R22.5 XZE2 |
| Rear tires | Continental 11R22.5 DH37 | Hankook 295/75R22.5 DL11 | Michelin 11R22.5 XDN2 |
| Base warranty | 2 years / Unlimited miles | 2 years / Unlimited miles | 1 year / Unlimited miles |
| Capacity & Chassis | |||
| Max GVWR | 35,000 lbs.Best | 33,000 lbs. | 33,000 lbs. |
| Bumper to back of cab (BBC): day / extended / crew | 107" / 132.9" / 150.9" | 106" / 132" / 154" | 109.5" (day cab only) |
| Back of cab to axle (BA) | 40" | 41" | 40" |
| Frame rating (RBM) | 859,200 – 2,413,200 in.-lbs. | 508,000 – 2,592,000 in.-lbs. | 1,776,000 – 2,572,000 in.-lbs. |
| Fuel tank | 40 – 140 gal. | 28 – 100 gal. | 40 – 200 gal. |
| DEF tank | 5, 7, 15, 16.5 gal. | 6, 13, 23 gal. | 5.5, 15 gal. |
| Wheel cut (left / right) | 40° / 39° | 44° / 44° | 48° / 48° |
| Calculated turning radius | 32.7' | 30.5' | 29.0' |
| Upfit & Body Builder | |||
| Body-builder wiring access | Back of cab, end of frame | Back of cab, end of frame | Back of cab, end of frame |
| Max auxiliary upfitter switches | Up to 30Best | Up to 24 | Up to 5 |
| Front-of-frame extension: integral | 20" | Not available | 24" |
| Front-of-frame extension: bolt-on | 20" | 3", 8" | Not available |
| Bumper extension | 4" | Not available | Not available |
| Powertrain & PTO | |||
| Engine options | Cummins B6.7 (6.7L)Cummins L9 (8.9L) | Cummins B6.7 (6.7L)Cummins L9 (8.9L)Detroit DD5 (5.1L)Detroit DD8 (7.7L) | PACCAR PX-7 (6.7L)PACCAR PX-9 (8.9L) |
| HorsepowerMV B6.7 ratings of 340 and 360 hp are for emergency vehicles only. See engine ratings below. | 200 – 360 hp260 – 360 hp | 200 – 360 hp260 – 360 hp200 – 240 hp260 – 375 hp | 200 – 360 hp260 – 450 hp |
| Torque | 600 – 800 lb.-ft.860 – 1,150 lb.-ft. | 600 – 800 lb.-ft.860 – 1,150 lb.-ft.560 – 660 lb.-ft.660 – 1,050 lb.-ft. | 520 – 800 lb.-ft.600 – 1,250 lb.-ft. |
| Engine warranty | B6.7: 2 years / Unlimited milesL9: 2 years / 250,000 miles | 2 years / 250,000 miles (all engines) | 2 years / 250,000 miles (both engines) |
| Manual transmission | Eaton Fuller: 6, 10-speed | Eaton Fuller: 6, 10, 11-speed | Eaton Fuller: 6, 9, 10-speed |
| Automated transmission | Not available | Not available | Eaton Fuller Advantage: 10-speed |
| Automatic transmission | Allison 1000, 2000, 3000: 5, 6-speed | Allison 1000, 2000, 3000: 6-speed | Allison 2000, 3000: 6-speed |
| Front-engine PTO (FEPTO) | Not available | Not available | Available |
| Rear-engine PTO (REPTO) | Not available | Not available | Available |
| Transmission PTO (transmission: mounting, bolt size) | Eaton Fuller FR / FRO manual: LH / RH side, rear mount, 6-boltAllison 1000, 2000: LH / RH side mount, 6-boltAllison 3000: LH / RH side, RH top mount, 10-bolt | Eaton Fuller FS / FSO / FR / FRW / FRO / RTO manual: LH / RH side, rear mount, 6-boltAllison 1000, 2000: LH / RH side mount, 6-boltAllison 3000: LH / RH side, RH top mount, 10-bolt | Eaton Fuller FS / FSO / FR / FRO / RT / RTO manual: LH / RH side, rear mount, 6-boltEaton Fuller Advantage: LH bottom, RH side, rear mount, 6, 8-boltPACCAR TX-18: LH / RH side mount, 4, 8-boltAllison 2000: LH / RH side mount, 6-boltAllison 3000: LH / RH side, RH top mount, 10-bolt |
| Visibility by sightline (lower is a shorter blind zone) | |||
| Driver side rear | 118.1" | 114.4" | 135.3" |
| Driver side forward | 147.2" | 150.2" | 161.9" |
| Forward left side | 193.9" | 190.4" | 225.0" |
| Forward straight ahead | 239.1" | 239.2" | 270.6" |
| Forward over center | 255.3" | 256.5" | 289.6" |
| Forward at hood corner | 269.4" | 267.4" | 307.2" |
| Forward wiper | 302.4" | 280.7" | 313.7" |
| Forward right side | 306.8" | 290.2" | 346.9" |
| Passenger side forward | 274.0" | 270.1" | 262.0" |
| Passenger side rear | 313.9" | 294.5" | 328.8" |
| Cab & Service Access | |||
| Cab construction | Welded steel | Aluminum | Aluminum |
| Hood design | 3-piece | 1-piece | 3-piece |
| Hood tilt range | 69°Best | 58° | 59° |
| Available cabs | Day cab, extended (26"), crew (44") | Day cab, extended (26"), crew (48") | Day cab |
| Step height: ground to step | 22.5" | 15.5" | 18" |
| Step height: step to step | 15.5" | 13.5" | 13.75" |
| Step height: step to cab | 7" | 11.25" | 14.5" |
| Total cab height | 45" | 40.25" | 46.25" |
| Cab width at shoulder | 78" | 76.75" | 78.5" |
| Cab width at hip | 72.5"Best | 71.75" | 69.75" |
| Interior cab volume | 93.20 cu. ft. | 91.7 cu. ft. | 101.50 cu. ft. |
| Leg room | 30.25"Best | 28.49" | 27.23" |
| Belly room | 21.5"Best | 18.5" | 19.75" |
| Door opening (height x width) | 52" x 35.5" | 52.5" x 33.25" | 50.25" x 33.75" |
| Windshield area | 1,909 sq. in. | 1,827 sq. in. | 1,946 sq. in. |
| Total glass area | 3,802 sq. in. | 3,628 sq. in. | 4,102 sq. in. |
| Routine Maintenance | |||
| Oil and filter | B6.7: up to 30,000 mi.L9: up to 50,000 mi. | B6.7: up to 30,000 mi.L9: up to 50,000 mi.DD5: 35,000 – 50,000 mi.DD8: 45,000 – 60,000 mi. | 15,000 mi. |
| Fuel filter | B6.7: 60,000 mi.L9: 50,000 mi. | B6.7: up to 60,000 mi.L9: up to 50,000 mi.DD5: 35,000 – 50,000 mi.DD8: 45,000 – 60,000 mi. | 15,000 mi. |
| Coolant filter | Not available | Not available | 15,000 mi. |
Best = leads the compared trucks on that spec. Shaded column = International MV.
International MV engine ratings
Full horsepower and torque ratings for the two Cummins engines offered in the MV.
Cummins B6.7 200 – 360* hp
- Engine type
- Diesel, 4-cycle
- Configuration
- Inline 6-cylinder
- Displacement
- 409 cu. in. (6.7L)
- Bore & stroke
- 4.21 x 4.88 in.
- Aspiration
- Variable geometry turbocharger
- Combustion system
- High pressure common rail (HPCR)
- Engine lubrication
- 15 qt. and 19 qt.
- Dry engine weight
- 1,150 lbs.
| HP rating | Governed speed (RPM) | Torque (lb.-ft. @ RPM) |
|---|---|---|
| 200 | 2600 | 600 @ 1600 |
| 220 | 2600 | 600 @ 1600 |
| 240 | 2600 | 600 @ 1600 |
| 250 | 2600 | 660 @ 1600 |
| 260 | 2600 | 660 @ 1600 |
| 280 | 2600 | 660 @ 1600 |
| 300 | 2600 | 660 @ 1600 |
| 325 | 2600 | 750 @ 1800 |
| 340* | 2600 | 700 @ 1600 |
| 360* | 2600 | 800 @ 1600 |
* Rated for emergency vehicles only.
Cummins L9 260 – 360 hp
- Engine type
- Diesel, 4-cycle
- Configuration
- Inline 6-cylinder
- Displacement
- 543 cu. in. (8.9L)
- Bore & stroke
- 4.49 x 5.69 in.
- Aspiration
- Variable geometry turbocharger
- Combustion system
- XPI direct injection
- Engine lubrication
- 20 qt. and 23 qt.
- Dry engine weight
- 1,695 lbs.
| HP rating | Governed speed (RPM) | Torque (lb.-ft. @ RPM) |
|---|---|---|
| 260* | 2200 | 860 @ 1200 |
| 270 | 2200 | 860 @ 1200 |
| 300 | 2200 | 860 @ 1200 |
| 330 | 2200 | 1000 @ 1200 |
| 350 | 2200 | 1050 @ 1200 |
| 360 | 2200 | 1150 @ 1200 |
* Not available for emergency applications.
Specifications are taken from the International MV Series Comparison Guide, retrieved November 16, 2026, and describe the configurations and options listed there. Competitor figures are as published in that guide. Availability varies by build, so confirm current specifications with the manufacturer before you order. Freightliner and Kenworth are trademarks of their respective owners. Allegiance Truck Centers is not affiliated with them.