Class-8 Heavy Duty Construction Truck Comparisons
On the jobsite
What the specs mean on a jobsite
Four places where the HV615 and its competitors differ in ways a vocational construction fleet will notice.
Ready for the body you are adding
Up to 30 auxiliary upfitter switches (114SD Plus: up to 40, Granite: up to 10, 567: up to 5), body-builder wiring at the back of cab and end of frame, and integral front-of-frame extensions of 20" and 27" for front-mounted equipment.
Frame and chassis
The frame is rated up to 3,350,000 in.-lbs. of resisting bending moment, with reinforcements to 3,580,800. A 4" bumper extension is available, and no other truck in this comparison offers one.
Power and PTO options
The S13 runs 370 to 515 hp and up to 1,850 lb.-ft., paired with the International T14 automated transmission or an Allison 3000 or 4000 automatic. Front-engine and rear-engine PTOs are both available. A manual transmission is not offered.
Room to work in the cab
A welded steel cab with 30.42" of leg room, 72.5" of cab width at the hip, and a 52" by 35.5" door opening, with extended and crew cab options. The hood tilts 65°, against 75° on the Granite and 70° on the 567.
Head to head
Side-by-side specifications
Specs are grouped by what matters when you are specifying a vocational truck. The HV615 leads on front-of-frame extensions, bumper extension, door width, and leg room, and trails on GVWR, axle capacity, and aux switches against the 114SD Plus. Highlighted cells lead the trucks compared.
Visibility around the cab
Good sightlines keep crews safe around a jobsite. This chart plots the guide’s ten sightline measurements for each truck. A smaller shape means a shorter blind zone.
- International HV615
- Freightliner 114SD Plus
- Mack Granite
- Peterbilt 567
The HV615 has a shorter blind zone than the 567 on eight of ten sightlines. The 114SD Plus is shorter than the HV615 on seven of the ten, and the Granite on eight of the ten.
| Specification | FeaturedInternational HV615 | Freightliner 114SD Plus | Mack Granite | Peterbilt 567 |
|---|---|---|---|---|
| Standard build compared | ||||
| Engine | International S13, 475 hp | Detroit DD13, 470 hp | Mack MP8, 505 hp | PACCAR MX-11, 415 hp |
| Transmission | International T14 | 4500 RDS | 4500 RDS | Eaton Fuller UltraShift |
| Frame rail (depth x flange x thickness) | 12.25" x 3.38" x .375" | 11.88" x 3.64" x .5" | 11.81" x 5.13" x .437" | 10.75" x 3.5" x .38" |
| Front axle | MFS-20-133A, 20K | DA-F-20.0-5, 20K | FLX20, 20K | PACCAR, 20K |
| Rear axle | RT-46-164EH, 46K | RT-46-160, 46K | RT-46-164EH, 46K | MT-40-14X, 40K |
| Rear suspension | Hendrickson HAULMAAX EX, 46K | Hendrickson PRIMAAX EX, 46K | Hendrickson HAULMAAX EX, 46K | Air Trac, 40K |
| Tire manufacturer | Michelin / Bridgestone | Michelin | Michelin | Bridgestone |
| Front tires | 425/65R22.5 XZY3 | 425/65R22.5 XZY3 | 425/65R22.5 XZY3 | 315/80R22.5 M870 |
| Rear tires | 11R22.5 M799 | 11R22.5 X Multi | 11R22.5 X Works | 11R22.5 M726ELA |
| Base warranty | 1 year / Unlimited miles | 1 year / Unlimited miles | 1 year / 100,000 miles | 1 year / 100,000 miles |
| Capacity & Chassis | ||||
| GVWR | 80,000 lbs. | 66,000 lbs. | 86,000 lbs. | 60,000 lbs. |
| Bumper to back of cab (BBC), standard build | 115" | 114" | 117" | 115" |
| Back of cab to axle (BA), standard build | 45.9" | 48" | 29" | 29.4" |
| Axle position: set forward | Not available | 31" | 29.4" | 29.4" (115 BBC)31" (121 BBC) |
| Axle position: set back | 45.9" | 48" | 51" | 46.9" |
| Frame rating (RBM) | 1,701,600 – 3,350,000 in.-lbs. | 1,808,400 – 3,204,000 in.-lbs. | 1,880,000 – 3,160,000 in.-lbs. | 1,776,000 – 3,012,000 in.-lbs. |
| Available reinforcements (RBM) | 3,580,800 in.-lbs. | 3,217,200 – 4,337,400 in.-lbs. | 3,230,000 – 4,260,000 in.-lbs. | 2,832,000 – 5,484,000 in.-lbs. |
| Front-axle capacity | 12,000 – 22,000 lbs. | 10,000 – 40,000 lbs. | 12,000 – 23,000 lbs. | 12,000 – 40,000 lbs. |
| Rear-axle capacity | 20,000 – 53,000 lbs. | 21,000 – 69,000 lbs. | 23,000 – 85,000 lbs. | 21,000 – 78,000 lbs. |
| Single rear axle | 20,000 – 38,000 lbs. | 21,000 – 31,000 lbs. | 23,000 – 30,000 lbs. | 21,000 – 30,000 lbs. |
| Tandem rear axle | 40,000 – 52,000 lbs. | 40,000 – 58,000 lbs. | 38,000 – 65,000 lbs. | 40,000 – 70,000 lbs. |
| Tridem rear axle | 53,000 lbs. | 69,000 lbs. | 45,000 – 85,000 lbs. | 53,000 – 78,000 lbs. |
| Axle manufacturers: front | Cummins-Meritor, Dana Spicer | Detroit, Cummins-Meritor, Marmon-Harrington | Mack, Marmon-Harrington | Cummins-Meritor, Dana Spicer, PACCAR, Hendrickson, Marmon-Harrington |
| Axle manufacturers: rear | Cummins-Meritor, Dana Spicer | Detroit, Cummins-Meritor, Dana Spicer | Mack, Cummins-Meritor, Dana Spicer | Cummins-Meritor, Dana Spicer, Sisu |
| Front suspension capacity | 12,000 – 22,000 lbs. | 12,000 – 23,000 lbs. | 12,000 – 23,000 lbs. | 12,000 – 40,000 lbs. |
| Rear suspension capacity | 20,000 – 53,000 lbs. | 21,000 – 69,000 lbs. | 23,000 – 85,000 lbs. | 20,000 – 85,000 lbs. |
| Front spring suspension | Taper-leaf, multi-leaf | Taper-leaf, flat-leaf | Taper-leaf, multi-leaf | Taper-leaf, split progressive |
| Rear spring suspension | International: Vari-rate multi-leaf, 4-spring multi-leaf; Chalmers: 1000, 800 Series | Freightliner: Flat-leaf, Vari-rate multi-leaf, TufTrac; Chalmers: 1000 Series | Multi-leaf | Reyco: Multi-leaf |
| Front air suspension | Not available | Not available | Not available | Peterbilt Air Leaf; Hendrickson: SOFTEK |
| Rear air suspension | International: IROS; Hendrickson: PRIMAAX EX, HAS; Raydan Link: Air Link | Freightliner: AirLiner; Hendrickson: PRIMAAX EX, FIREMAAX EX | Mack: AL-402; Link: Air Link; Hendrickson: PRIMAAX EX; Neway: ADZ | Peterbilt: Air Trac, Air Leaf, Low Air Leaf, Flex Air; Reyco: 102AR; Neway: ADZ |
| Rear beam suspension | Hendrickson: RT, HAULMAAX EX; Chalmers: 800 Series | Hendrickson: RT, HAULMAAX EX; Chalmers: 800 Series | Mack: Camelback, mRide; Hendrickson: RS, RT, RTE, HAULMAAX EX, HN; Chalmers: 800 Series | Hendrickson: R, RS, RT, HAULMAAX EX, HN; Chalmers: 800 Series |
| Fuel tank | 50 – 200 gal. | 28 – 300 gal. | 50 – 232 gal. | 50 – 300 gal. |
| DEF tank | 5, 10.8, 18 gal. | 6, 13, 23 gal. | 6.6, 8.7, 11.8, 18.4 gal. | 8, 10.2, 16.1, 20.1 gal. |
| Towing / recovery: front | Shackle, hooks, pins | Pin, hooks | Hooks, loops, pins | Pins, eye |
| Towing / recovery: rear | Loop, hook, pintle hitch | Pintle hitch, hooks | Hooks | Eye, hooks, pintle hitch |
| Upfit & Body Builder | ||||
| Body-builder wiring access | Back of cab, end of frame | Back of cab, end of frame | Back of cab, end of frame | Back of cab, end of frame |
| Max auxiliary upfitter switches | Up to 30 | Up to 40 | Up to 10 | Up to 5 |
| Front-of-frame extension: integral | 20", 27"Best | 12", 24" | 20" | Not available |
| Front-of-frame extension: bolt-on | Not available | Not available | 6", 27" | Not available |
| Bumper extension | 4"Best | Not available | Not available | Not available |
| Hood hatch | Available | Available | Not available | Not available |
| Integral snow valve | Available | Available | Available | Available |
| Powertrain & PTO | ||||
| Engine options | International S13 (12.7L) | Detroit DD8 (7.7L)Detroit DD13 (12.8L)Cummins L9 (8.9L)Cummins L9N (8.9L)Cummins X12 (11.9L)Cummins X12N (11.9L) | Mack MP7 (10.8L)Mack MP8 (12.8L) | PACCAR PX-9 (8.9L)PACCAR MX-11 (10.8L)PACCAR MX-13 (12.9L)Cummins L9N (8.9L)Cummins X12N (11.9L)Cummins X15 (14.9L) |
| Horsepower | 370 – 515 hp | 330 – 375 hp370 – 525 hp260 – 450 hp250 – 320 hp350 – 500 hp320 – 400 hp | 325 – 425 hp415 – 505 hp | 350 – 450 hp355 – 430 hp405 – 510 hp250 – 320 hp320 – 400 hp430 – 605 hp |
| Torque | 1,250 – 1,850 lb.-ft. | 1,000 – 1,050 lb.-ft.1,250 – 1,850 lb.-ft.860 – 1,250 lb.-ft.730 – 1,000 lb.-ft.1,250 – 1,700 lb.-ft.1,150 – 1,450 lb.-ft. | 1,260 – 1,560 lb.-ft.1,460 – 1,860 lb.-ft. | 1,050 – 1,250 lb.-ft.1,150 – 1,650 lb.-ft.1,450 – 1,850 lb.-ft.730 – 1,000 lb.-ft.1,150 – 1,450 lb.-ft.1,450 – 2,050 lb.-ft. |
| Engine warranty | 2 years / Unlimited miles | DD8: 3 years / 250,000 milesDD13: 2 years / Unlimited milesL9: 2 years / 250,000 milesL9N: 2 years / 250,000 milesX12: 2 years / 250,000 milesX12N: 2 years / 250,000 miles | 2 years / 250,000 miles (both engines) | 2 years / 250,000 miles (all engines) |
| Manual transmission | Not available | Eaton Fuller: 9, 10, 11, 13, 18-speed | Eaton Fuller: 10, 11, 13, 18-speed | Eaton Fuller: 9, 10, 11, 13, 18-speed |
| Automated transmission | International T14: 14-speed | Detroit DT12: 12-speedEaton Cummins Endurant: 11, 12, 18-speed | Mack MAXITORQUE: 9, 10, 13, 18-speedMack mDrive HD: 12, 13, 14-speed | Eaton Fuller UltraShift PLUS: 10, 11, 13, 18-speedEaton Fuller Advantage: 10-speedEaton Cummins Endurant: 12, 18-speed |
| Automatic transmission | Allison 3000, 4000: 5, 6, 7-speed | Allison 3000, 4000: 6, 7-speed | Allison 3000, 4000: 5, 6-speed | PACCAR TX-12, TX-18: 12, 18-speedAllison 3000, 4000: 5, 6, 7-speed |
| Front-engine PTO (FEPTO) | Available | Available | Available | Not available |
| Rear-engine PTO (REPTO)Transmission-mounted PTO locations and bolt sizes vary by transmission. Ask us for the option list. | Available | Available | Available | Available |
| Visibility by sightline (lower is a shorter blind zone) | ||||
| Driver side rear | 128.6" | 134.5" | 123.8" | 140.3" |
| Driver side forward | 162.3" | 173.9" | 147.3" | 188.5" |
| Forward left side | 214.3" | 218.2" | 193.6" | 266.3" |
| Forward straight ahead | 341.1" | 315.2" | 317.7" | 355.1" |
| Forward over center | 397.3" | 336.5" | 333.1" | 390.4" |
| Forward at hood corner | 375.4" | 338.7" | 353.1" | 380.4" |
| Forward wiper | 354.5" | 319.8" | 392.8" | 378.2" |
| Forward right side | 341.0" | 313.4" | 355.1" | 394.8" |
| Passenger side forward | 294.8" | 290.0" | 278.0" | 310.4" |
| Passenger side rear | 335.2" | 309.4" | 313.5" | 332.2" |
| Cab & Service Access | ||||
| Cab construction | Welded steel | Aluminum | Welded steel | Aluminum |
| Hood design | 5-piece | 1-piece | 1-piece | 3-piece |
| Hood tilt range | 65° | 64° | 75° | 70° |
| Available cabs / sleepers | Day cabExtended cab: 26"Crew cab: 44" | Day cabExtended cab: 26"Crew cab: 48" | Day cabLow roof: 36" | Day cabLow roof: 44", 58"High roof: 58", 72", 80"UltraLoft: 80" |
| Step height: ground to step | 19.5" | 21.75" | 23.75" | 22" |
| Step height: step to step | 18.5" | 18" | 18.5" | 15.75" |
| Step height: step to cab | 15.75" | 16" | 10.5" | 16.75" |
| Total cab height | 53.75" | 55.75" | 52.75" | 54.5" |
| Cab width at shoulder | 78" | 76.75" | 74.75" | 78.25" |
| Cab width at hip | 72.5"Best | 71.75" | 65.5" | 70.75" |
| Fuel pedal to back of cab | 46.5" | 45.75" | 48" | 43.25" |
| Floor to roof at seat edge | 56" | 56.25" | 57.5" | 58.5" |
| Interior cab volume | 92.6 cu. ft. | 91.7 cu. ft. | 93.6 cu. ft. | 98.2 cu. ft. |
| Leg room | 30.42"Best | 28.67" | 29.69" | 27.50" |
| Belly room | 19.75" | 20" | 17.5" | 19" |
| Head room (minimum / maximum) | 33.75" / 39.75" | 35" / 40.75" | 36.5" / 43.25" | 37.5" / 44.5" |
| Door opening (height x width) | 52" x 35.5" | 52.5" x 33.25" | 50.5" x 31.5" | 50.25" x 33.75" |
| Door opening width | 35.5"Best | 33.25" | 31.5" | 33.75" |
| Door opening angle | 64° | 63° | 80° | 71° |
| Windshield installation | Bonded | Roped-in | Roped-in | Bonded |
| Windshield slope | 63° | 64° | 69° | 64° |
| Windshield area | 1,909 sq. in. | 1,827 sq. in. | 1,839 sq. in. | 1,946 sq. in. |
| Wiper coverage | 1,193 sq. in. | 1,302 sq. in. | 1,082 sq. in. | 1,343 sq. in. |
| Wiper efficiency | 62% | 71% | 59% | 69% |
| Side glass | 1,144 sq. in. | 1,144 sq. in. | 882 sq. in. | 1,232 sq. in. |
| Rear glass | 749 sq. in. | 657 sq. in. | 842 sq. in. | 1,010 sq. in. |
| Total glass area | 3,802 sq. in. | 3,628 sq. in. | 3,563 sq. in. | 4,188 sq. in. |
| Routine Maintenance | ||||
| Oil and filterListed per engine in the order shown under Engine options. The guide prints seven intervals for the 114SD Plus. | Up to 70,000 mi. | 45,000 – 60,000 mi.35,000 – 65,000 mi.Up to 50,000 mi.1,000 – 1,500 hrs.40,000 – 100,000 mi.1,000 hrs.1,500 hrs. | MP7: 30,000 – 60,000 mi.MP8: 30,000 – 60,000 mi. | PX-9: 50,000 mi.MX-11: 30,000 – 75,000 mi.MX-13: 30,000 – 75,000 mi.L9N: 1,000 hrs.X12N: 1,000 hrs.X15: 30,000 – 100,000 mi. |
| Fuel filter | Up to 70,000 mi. | 45,000 – 60,000 mi.35,000 – 65,000 mi.Up to 50,000 mi.1,000 hrs.30,000 – 75,000 mi.1,000 hrs.1,200 hrs. | MP7: 30,000 – 60,000 mi.MP8: 30,000 – 60,000 mi. | PX-9: 50,000 mi.MX-11: 30,000 – 75,000 mi.MX-13: 30,000 – 75,000 mi.L9N: 1,000 hrs.X12N: 1,000 hrs.X15: 25,000 – 70,000 mi. |
| Coolant filter | Up to 600,000 mi. | DD8: Not availableDD13: Not availableL9: Not availableL9N: 500 – 4,000 hrs.X12: Not availableX12N: Not available | MP7: 30,000 – 60,000 mi.MP8: 30,000 – 60,000 mi. | PX-9: 15,000 mi.MX-11: 300,000 mi.MX-13: 300,000 mi.L9N: 500 hrs.X12N: 1,500 hrs.X15: Not available |
Best = leads the compared trucks on that spec. Shaded column = International HV615.
International S13 engine
The engine offered in the HV615. The guide publishes the full specifications but no horsepower and torque rating table.
International S13 370 – 515 hp
- Engine type
- Diesel, 4-cycle
- Configuration
- Inline 6-cylinder
- Displacement
- 12.74L (777 cu. in.)
- Bore & stroke
- 5.12 x 6.30 in.
- Compression ratio
- 23:1
- Aspiration
- Fixed geometry turbocharger
- Combustion system
- 1800 bar common rail
- Engine lubrication
- 47.5 quarts (45L)
- Total engine weight
- 2,284 lbs.
- Valves
- 4 per cylinder, dual overhead camshaft
- B10 design life
- 1,200,000 mi
- Base engine warranty
- 24 months; unlimited miles
- Optional engine warranty
- Up to 72 months, 600,000 miles
Torque range 1,250 – 1,850 lb.-ft. Fire & rescue applications carry a different base warranty.
Specifications are taken from the International HV Series Heavy Comparison Guide (HV615), retrieved November 17, 2026, and describe the configurations and options listed there. Competitor figures are as published in that guide. Availability varies by build, so confirm current specifications with the manufacturer before you order. Freightliner, Mack, and Peterbilt are trademarks of their respective owners. Allegiance Truck Centers is not affiliated with them.